LM Otero/AP WASHINGTON -- U.S. wholesale inventories barely rose in July, suggesting a slower pace of stock accumulation at the start of the third quarter that prompted economists to trim growth estimates. The Commerce Department said Wednesday wholesale inventories edged up 0.1 percent, the smallest rise since July of last year, after a 0.2 percent gain in June. Inventories are a key component of gross domestic product changes. The component that goes into the calculation of GDP -- wholesale stocks excluding autos -- was flat. The rise in overall stocks at wholesalers in July was well below the 0.5 percent increase that Wall Street had anticipated, leading some economists to lower their GDP growth estimates for the July-September quarter. Barclays cut its third-quarter growth estimate by two-tenths of a percentage point to a 2.5 percent annual rate. Action Economics lowered its forecast to a 2.8 percent pace from 3 percent. A report last week showed stocks of manufactured goods at factories rose only 0.1 percent in July. Retail inventory data for July, due to be released Friday, will shed more light on the state of restocking early in the third quarter. Inventories added 1.4 percentage points to GDP growth in the second quarter. The slow pace of inventory accumulation, however, bodes well for fourth-quarter growth. "While there is very little information about fourth-quarter growth available at this point, a more modest inventory accumulation in the third quarter is a positive development for fourth-quarter GDP, all else equal," said Daniel Silver, an economist at JPMorgan (JPM) in New York. Wholesale inventories in July were held back by declines in stocks of farm products, chemicals, furniture, professional equipment, petroleum, paper and metals. Auto inventories increased 1 percent in July after declining 0.2 percent in June. Sales at wholesalers rose 0.7 percent in July after climbing 0.4 percent in June. At July's sales pace it would take 1.16 months to clear shelves, the lowest since December 2013 and down from 1.17 months in June.
Hot Food Stocks For 2015: Rockwood Holdings Inc (ROC)
Rockwood Holdings, Inc. (Rockwood), incorporated in September 19, 2000, is a developer, manufacturer and marketer of specialty chemicals and advanced materials used for industrial and commercial purposes. Rockwood is focused on surface treatment and lithium chemicals, advanced ceramics, titanium dioxide pigments, iron-oxide pigments, timber-treatment chemicals and clay-based additives. Its products consist primarily of inorganic chemicals and solutions and engineered materials. As of December 31, 2012, it manufactured its products in 80 facilities in more than twenty countries and sold its products and services to more than 60,000 customers. The Company operates in five segments: Lithium, Surface Treatment, Performance Additives, Titanium Dioxide Pigments, and Advanced Ceramics. In September 2012, its subsidiary, Chemetall GmbH, completed the formal legal split of its operations into two independent legal entities. In September 2013, Rockwood Holdings, Inc completed the sale of CeramTec, its advanced ceramics business to Cinven. In October 2013, Rockwood Holdings Inc announced that the specialty chemicals group ALTANA completed the acquisition of the rheology business of Rockwood Holdings, Inc.
Lithium
The Company�� Lithium segment operates under the Rockwood Lithium brand name and develops lithium chemicals for a range of industries and end markets. It develops and manufactures a broad range of basic lithium compounds, including lithium carbonate, lithium hydroxide, lithium chloride, and lithium specialties and reagents, including butyllithium and lithium aluminum hydride. The Company operates its lithium business along five business divisions: Lithium Salts, Special Salts, Butyllithium/Lithium Metal, Battery Products and Lithium Specialties.
The Company develops and manufactures basic lithium compounds, which serve a range of industries and applications, and potash. Its products include lithium carbonate, lithium hydroxide, lithium nitrate, lithium chloride ! and potash. The Company develops and manufactures products which include lithium phosphate, lithium bromide and lithium carbonate pharmaceutical grade. It develops and manufactures lithium products for electronic applications, mainly for the primary (disposable) and secondary (rechargeable) battery industries. It develop and manufacture lithium compounds and other products for life science applications, such as special reagents for the synthesis of drug intermediates as well as for the flavor and fragrances industry. The Company develops and manufactures a range of products based on special metal compounds derived from cesium, zirconium, titanium, barium and rubidium.
The Company competes with FMC Corporation, Sociedad Quimica y Minera de Chile S.A., Cabot Corporation, Sigma Aldrich Corporation.
Surface Treatment
The Company�� Surface Treatment segment operates under the Chemetall brand name and develops and manufactures metal surface treatment products and services for a range of industries and end markets. This segment supplies surface treatment products and solutions for metal processing industries. It develops and supplies products and solutions for the chemical pre-treatment of metals and other substrates, some of which are customized for individual customers and applications. The Company provides surface treatment products and solutions for automotive original equipment manufacturers (OEMs), including an entire range of products and services for use in the paint shop step of car-body and automotive component manufacture. It provides products and services used to facilitate the cold forming of tubes, wire drawing and cold extrusion of metal.
The Company competes with Henkel AG & Co. KGaA, Nihon Parkerizing Co., Ltd., PPG Industries, Inc. and Nippon Paint Co., Ltd.
Performance Additives
The Company�� Performance Additives segment consists of business lines which develop and manufacture a range of specialty chemicals us! ed indust! rial and consumer products and processes. The Company produces synthetic iron-oxide and other inorganic pigments in a range of yellow, red, orange, ultramarine blue, black, manganese violet or blended shades, and serves the construction, paints and coatings, plastics, and specialty application markets with powder, granular and liquid grades. The Company develops and manufactures principally iron-oxide pigments for manufacturers of construction products for use in the coloring of concrete products, including paving stones, bricks, concrete blocks, roofing tiles, stucco and mortar.
It also develops and manufactures color pigments for the paints, coatings, plastics, paper and rubber end-use markets including its brands Ferroxide, Trans-oxide, Solaplex, Solarox and Colourplex. It produces a wide variety of pigments that include synthetic iron-oxides, corrosion inhibitor pigments, complex inorganic color pigments and process natural pigments such as burnt umbers and siennas. Its iron-oxide pigments are also used in a variety of specialty applications such as toner for printers and copiers, security inks used to print bank notes, catalysts for styrene production and cosmetics.
The Company�� Timber Treatment Chemicals business line manufactures food protection products primarily in North America and Europe. Its Timber Treatment Chemicals business also manufactures inorganic chemicals such as nitrates and chlorides for various industrial applications including chemicals that are added to concrete as curing accelerants and corrosion inhibitors, chemicals that are used for odor control in water treatment, galvanizing fluxes, micronutrients, pesticides and catalysts used in the manufacture of textile resins. The Company also develops and manufacture inorganic metallic chemicals for certain specialty markets. Its Clay-based Additives business develops and manufactures a range of specialty rheology modifiers and additives.
The Company competes with Lanxess AG, Cathay Pigment! s Group, ! Interstar Materials Inc. and Shanghai Yipin Pigments Co., Ltd., Lonza Group Ltd, Osmose, Inc., BASF Group, Kurt Obermeier GmbH & Co. KG, Rutgers AG, Elementis plc, Laviosa Chimica Mineraria S.p.A., R.T. Vanderbilt Company, Inc., Amcol, and Feralco AB.
Titanium Dioxide Pigments
The Company�� Titanium Dioxide Pigments segment operates under the Sachtleben brand name. Titanium Dioxide Pigments consists of two business lines: Titanium Dioxide and Functional Additives. It produces specialty grade titanium dioxide (TiO2) serving a variety of customers in the synthetic fibers, plastics, paints, packaging inks, coatings, cosmetics, pharmaceuticals and paper industries. The Company also develops TiO2 pigments, which are mainly used in special applications such as selected coatings, paints, packaging inks, plastics and laminated paper production processes. Its Functional Additives business line is a global manufacturer of barium-based and zinc-based inorganic fine white pigments and additives.
The Company competes with Fuji Titanium Industry Co., Ltd, Kronos Worldwide, Inc, DuPont Titanium Technologies, Cristal Global, Tronox Incorporated, Huntsman LLC, Tayca Corporation, Ishihara Corporation and Evonik Degussa., Solvay S.A., Gruppo Chimico Dalton S.p.A., Sakai Chemical Industry Co., Ltd.
Advanced Ceramics
The Company�� Advanced Ceramics segment operates under the CeramTec brand name. The Company produces ceramic components for hip joint prostheses, such as ball heads and inserts and ceramic glove formers latex gloves. The Company develops and manufacture products used in cutting tools, other tools and tooling systems. The Company develops and manufactures ceramic components that are used in mechanical applications and systems. Its products in mechanical applications include cutting blades, drawing and forming tools, drawing cones and capstans, guide elements, precision parts, pre-forms and friction discs. It also produces products used for app! lications! in certain niche markets, such as electrical/thermal and ceramic metal connections, pre-forms for the casting process of piston engines, mainly for diesel engines, and wear and corrosion protection in industrial plants and armor components used in vehicle protection.
The Company competes with Kyocera Corporation, CoorsTek, Inc., The Morgan Crucible Company plc and 3M.
Advisors' Opinion:- [By Ben Levisohn]
Air Products & Chemicals’ (APD) gain is Rockwood Holdings’ (ROC) loss after Air Products hired away Rockwood’s CEO Seifi Ghasemi to run the chemical company.
- [By Rich Duprey]
Specialty chemicals maker�Rockwood Holdings� (NYSE: ROC ) �announced yesterday�its second-quarter dividend of $0.40 per share, the same rate it paid last quarter after raising the payout 14%, from $0.35 per share.
- [By Vivian Lewis]
The other major component of the payout is return of capital (ROC), which is not taxed but added to your basis for US taxes. EXG's 2012 distributions comprised 15% QIF and 85% ROC. It distributes monthly. Of course the makeup may change this year.
Top 10 Chemical Companies To Invest In Right Now: Stepan Co (SCL)
Stepan Company, incorporated on February 19, 1959, produces specialty and intermediate chemicals, which are sold to other manufacturers and then made into a variety of end products. The Company serves principal markets, such as manufacturers of cleaning and washing compounds (including detergents, shampoos, fabric softeners, toothpastes and household cleaners), paints, cosmetics, food and beverages, agricultural products, plastics, furniture, automotive equipment, insulation and refrigeration. The Company has three segments: surfactants, polymers and specialty products. The Company operates in the geographical regions of North America, Europe, Latin America and Asia. As of December 31, 2012, the Surfactants segment accounted to 72%, Polymers segment accounted to 24% and Specialty segment accounted to 4% of the Company�� revenues. On March 22, 2012, the Company increased its controlling interest in Stepan Philippines Inc from 89% to 100%.
Surfactants
Surfactants are used in a variety of consumer and industrial cleaning compounds as well as in agricultural products, lubricating ingredients, biodiesel and other specialized applications. The Surfactants are principal ingredients in consumer and industrial cleaning products, such as detergents for washing clothes, dishes, carpets, floors and walls, as well as shampoos, body washes, toothpastes and fabric softeners. Surfactants are manufactured at six North American sites (five in the United States and one in Canada), three European sites (United Kingdom, France and Germany), and three Latin American sites (Mexico, Brazil and Colombia), and one Asian site (Philippines and Singapore). The Company also holds a 50% ownership interest in a joint venture, TIORCO, LLC (TIORCO), that markets chemical solutions for increasing the production of crude oil and natural gas from existing fields.
Polymers
Polymers generate its revenues primarily from the sale of polyols and phthalic anhydride used in plastics, buildi! ng materials and refrigeration systems. It includes two primary product lines: polyols and phthalic anhydride. Polyols are used in the manufacture of rigid laminate insulation board for thermal insulation in the construction industry. Polyols are also a base raw material for flexible foams, coatings, adhesives, sealants and elastomers.
Phthalic anhydride is used in unsaturated polyester resins, alkyd resins and plasticizers for applications in construction materials and components of automotive, boating and other consumer products. In addition, phthalic anhydride is used internally in the production of polyols. In the United States, polymer product lines are manufactured at the Company�� Millsdale, Illinois, site. In Europe, polyols are manufactured at the Company�� subsidiaries in Germany and Poland. In Asia, polyols are produced at the Company�� 80% owned joint venture in Nanjing, China.
Specialty Products
Specialty products are used in food, flavoring and pharmaceutical applications. It includes flavors, emulsifiers and solubilizers used in the food and pharmaceutical industries. Specialty products are primarily manufactured at the Company�� Maywood, New Jersey, site.
Advisors' Opinion:- [By Seth Jayson]
Basic guidelines
In this series, I examine inventory using a simple rule of thumb: Inventory increases ought to roughly parallel revenue increases. If inventory bloats more quickly than sales grow, this might be a sign that expected sales haven't materialized. Is the current inventory situation at Stepan (NYSE: SCL ) out of line? To figure that out, start by comparing the company's inventory growth to sales growth. How is Stepan doing by this quick checkup? At first glance, not so great. Trailing-12-month revenue decreased 4.8%, and inventory increased 30.6%. Comparing the latest quarter to the prior-year quarter, the story looks potentially problematic. Revenue dropped 1.9%, and inventory grew 30.6%. Over the sequential quarterly period, the trend looks OK but not great. Revenue grew 6.9%, and inventory grew 9.5%.
Top 10 Chemical Companies To Invest In Right Now: Symrise AG (SY1)
Symrise AG is a Germany-based fragrances and flavors manufacturer. The Company diversifies its activities into two business divisions: Flavor & Nutrition and Scent & Care. The Flavor & Nutrition business division produces flavors in liquid, powder, granulated and paste form, providing individual flavors as well as complete solutions which, apart from aroma, can contain additional functional raw materials, colorants or microencapsulated components. The products are divided into the beverages, savory, sweet and consumer health groups. The Scent & Care business division is divided into Fragrances, Oral Care, Life Essentials and Aroma Molecules. The Fragrances products are divided into the Fine Fragrances, Personal Care and Household groups. The Life Essentials are used in the cosmetic ingredients market, and include Botanicals and Cosmetic Ingredients, among others. The Aroma Molecules are used in the aroma chemicals market, and include Sensates (Menthols), among others. Advisors' Opinion:- [By Inyoung Hwang]
Symrise AG (SY1) jumped 5.7 percent to 32.95 euros. The fourth-largest maker of flavors and fragrances pledged to remain one of the most profitable companies in its industry amid higher demand for aroma molecules and fragrances. Earnings before interest, taxes, depreciation and amortization, will be about 20 percent of sales in 2013 and will stay in the range of 19 percent to 22 percent in coming years, the company said today.
Top 10 Chemical Companies To Invest In Right Now: Braskem SA (BRKM5)
Braskem SA is a Brazil-based company primarily engaged in the manufacture of basic petrochemical products. The Company operates in five segments: Basic petrochemicals, Polyolefins, Vinyls, International businesses and Chemical Distribution. The Company�� products portfolio includes ethylene, propylene, butadiene, toluene, xylene, benzene, gasoline, diesel oil, liquefied petroleum gas (LPG), as well as thermoplastic resins, such as polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC). Additionally, Braskem is also engaged in the import and export of chemicals, petrochemicals and fuels; the production, supply and sale of utilities, such as steam, water, compressed air, industrial gases, as well as the provision of industrial services, and the production, supply and sale of electric energy for its own use and use by other companies. The Company also invests in other companies, either as a partner or shareholder. Advisors' Opinion:- [By Harry Suhartono]
Brazil�� Ibovespa rose for a third day as traders pared bets on higher borrowing costs in Brazil, boosting the outlook for companies that sell in the local market. B2W Cia. Digital led gains among retailers, with Lojas Americanas SA (LAME3) and Natura Cosmeticos SA (NATU3) also trading higher. Petrochemicals producer Braskem SA (BRKM5) was the worst performer on the equity gauge after O Estado de S.Paulo reported Petroleo Brasileiro SA (PETR4) is seeking to raise prices of naphtha sold to the company by 5 percent.
Top 10 Chemical Companies To Invest In Right Now: W. R. Grace & Co (GRA)
W.R. Grace & Co. (Grace), incorporated on August 6, 1997, is engaged in the production and sale of specialty chemicals and specialty materials on a global basis. The Company operates in three segments: Grace Catalysts Technologies; Grace Materials Technologies; and Grace Construction Products. Grace Catalysts Technologies will include catalysts and related technologies used in refining, petrochemical and other chemical manufacturing applications. Grace's Advanced Refining Technologies LLC (ART) joint venture will be managed in this segment. Grace Materials Technologies will include engineered materials, coatings and sealants used in industrial, consumer, pharmaceutical and packaging applications. Grace Construction Products will include specialty construction chemicals and specialty building materials used in commercial, infrastructure and residential construction. The Company conducts business in over 40 countries. In July 2012, the Company acquired Rheoset Industria e Comercio de Aditivos Ltda. In November 2012, the Company acquired the assets of Noblestar Catalysts Co., Ltd. In April 2013, it acquired Chemind Construction Products. In December 2013, the Company announced that it has completed the acquisition of the assets of the Polypropylene Licensing and Catalysts business of The Dow Chemical Company.
Refining Technologies
The Company is engaged in developing and manufacturing fluid catalytic cracking (FCC) catalysts and additives for petroleum refiners. Grace markets hydroprocessing catalysts primarily through ART, its joint venture with Chevron Products Company (Chevron). The Company established ART to combine its technology with that of Chevron and to develop, market and sell hydroprocessing catalysts to customers in the petroleum refining industry worldwide. Grace is a supplier of hydroprocessing catalysts designed for processing these feedstocks. The Company offers products for fixed-bed resid hydrotreating, on-stream catalyst replacement, ebullating-bed resid hydro! cracking and distillate hydrotreating processes. It also offers a full line of catalysts, customized for individual refiners, used in processing ultra-low sulfur content gasoline and diesel fuel, including its SMART Catalyst System and ApART catalyst system.
Grace provides enabling technologies that are silica- and silica-alumina-based functional additives and process aids, such as silica gel, colloidal silica, zeolitic adsorbents, precipitated silica and silica-aluminas, for a range of applications. The Company�� product portfolio includes PERKASIL, LUDOX, PHONOSORB, PHONOSORB MTX, SYLOBEAD, SYLOSIV, CRYOSIV, SAFETYSORB, PoliEdge, SYLODENT, SYLOID FP, SYLOBLANC, ELFADENT, SYLOID, DARACLAR, TriSyl, SHIELDEX, SYLOWHITE, SYLOJET, DURAFILL, LUDOX, DAREX, DARAFORM, DARASEAL, DARABLEND, Sincera, Celox, Apperta, Sistiaga, and SAFETYSORB.
Specialty Technologies
The Company is a provider of catalyst systems and catalyst supports to the polyolefins industry for a variety of polyethylene and polypropylene process technologies. These types of catalysts are used for the manufacture of polyethylene and polypropylene resins used in products such as plastic film, high-performance plastic pipe, automobile parts, household appliances and household containers. Its Magnapore polymerization catalyst is used to produce high performance polyethylene in the slurry loop process for pipe and film applications. Its POLYTRAK polymerization catalyst is used in automobile bumpers and household appliances. The Company's DAVICAT standard and customized catalysts offer a range of chemical and physical properties based on its material science technology for supported catalysts, polystyrene, herbicide, neutriceuticals and on purpose olefins. The Company's RANEY nickel, cobalt and copper hydrogenation and dehydrogenation catalysts are used for the synthesis of organic compounds for the fibers, polyurethanes, engineered plastics, pharmaceuticals, sweeteners and petroleum industries.
Gr! ace Const! ruction Products
Grace Construction Products produces and sells specialty construction chemicals and specialty building materials. It includes construction chemicals including concrete admixtures and fibers used to modify the rheology, improve the durability and enhance various other properties of concrete, mortar, masonry and other cementitious construction materials; and additives used in cement processing to improve energy efficiency in manufacturing, enhance the characteristics of finished cement and improve ease of use, and Building materials used in both new construction and renovation/repair projects. The products protect buildings and civil engineering structures from water, vapor and air penetration. The portfolio includes waterproofing membranes for commercial and residential buildings, specialty grouts for use in waterproofing and soil stabilization applications, air and vapor barriers, and other products to solve the specialized needs of preventative and repair applications.
The Company competes with Albemarle, BASF, Criterion, Haldor Topsoe, Axens, PQ/INEOS, Evonik, UOP, Altana, Waters Corporation, Agilent Technologies, Thermo-Fisher and Sika.
Advisors' Opinion:- [By Selena Maranjian]
Tiger Global Management reduced its stake in lots of companies, including specialty chemical company W. R. Grace (NYSE: GRA ) , which is getting close to emerging from Chapter 11 bankruptcy protection. Its last earnings report featured revenue and earnings below the company's own expectations, but that didn't faze Goldman Sachs, which recently upgraded Grace stock to its Conviction Buy list, citing its cash flow and a strengthening construction market.
Top 10 Chemical Companies To Invest In Right Now: Sensient Technologies Corp (SXT)
Sensient Technologies Corporation, incorporated on December 07, 1882, is a global manufacturer and marketer of colors, flavors and fragrances. Sensient uses advanced technologies at facilities around the world to develop specialty food and beverage systems, cosmetic and pharmaceutical systems, inkjet and specialty inks and colors, and other specialty and chemicals. The Company�� customers include international manufacturers representing some of the Known brands. The Company operates in two segments: Flavors & Fragrances Group and the Color Group. The Asia Pacific and the China Groups are included in the Corporate & Other category, along with the Company�� corporate expenses. The Company's principal products include: flavors, flavor enhancers and bionutrients; fragrances and aroma chemicals; dehydrated vegetables and other food ingredients; natural and synthetic food and beverage colors; cosmetic and pharmaceutical colors and additives; and technical colors, inkjet colors and inks, and specialty dyes and pigments.
Flavors & Fragrances Group
The Company is a developer, manufacturer and supplier of flavor and fragrance systems for the food, beverage, pharmaceutical, personal care and household-products industries. The Company�� flavor formulations are used in consumer products. Under the unified brand names of Sensient Flavors, Sensient Dehydrated Flavors and Sensient Fragrances, the Company is a supplier to multinational companies. The Flavors & Fragrances Group produces flavor and fragrance products, which impart a taste, texture, aroma and/or other characteristics to a range of consumer and other products. It includes the Company�� dehydrated flavors business, which produces ingredients for food processors. The products are systems products, including flavor-delivery systems, and compounded and blended products. In addition, the Company is engaged in selected ingredient products, such as essential oils, natural and synthetic flavors, and aroma chemicals. The Company ! serves food and non-food industries. In food industries, markets include savory, beverage, dairy, confectionery and bakery flavors. In non-food industries, the Company supplies fragrance products to the personal and home-care markets and supplies flavor products to the pharmaceuticals market.
Operating through the Company�� Sensient Dehydrated Flavors business, the Company is produces dehydrated onion and garlic products in the United States. The Company is also producers and distributors of chili powder, paprika, chili pepper and dehydrated vegetables, such as parsley, celery and spinach. Domestically, the Company sells dehydrated products to food manufacturers for use as ingredients and also for repackaging under private labels for sale to the retail market and to the food service industry. In addition, Sensient Dehydrated Flavors is dehydrators of specialty vegetables in Europe. The Flavors & Fragrances Group operates through the Company's subsidiaries Sensient Flavors LLC and Sensient Dehydrated Flavors LLC. The Company�� principal manufacturing plants are located in California, Illinois, Indiana, Michigan, Wisconsin, Belgium, Canada, the People�� Republic of China, France, Germany, Italy, Mexico, the Netherlands, Spain and the United Kingdom.
Color Group
The Company is a developer, manufacturer and supplier of colors for businesses globally. The Company provides natural and synthetic color systems for use in foods, beverages and pharmaceuticals; colors and other ingredients for cosmetics and pharmaceuticals, and technical colors for industrial applications and digital imaging. The Company sells its synthetic and natural colors to domestic and international producers of beverages, bakery products, processed foods, confections, pet foods, cosmetics and pharmaceuticals. The Company also makes inkjet inks and other dyes and pigments used in a variety of non-food applications.
The Color Group operates through the Company's subsidiary Sensient Col! ors LLC. ! Its principal manufacturing plants are located in California, Missouri, New Jersey, Brazil, Canada, Mexico, France, Germany, Hungary, Italy, Switzerland and the United Kingdom. The Color Group operates under trade names of Sensient Food Colors (food and beverage colors); Sensient Pharmaceutical Coating Systems (pharmaceutical colors and coatings); Sensient Cosmetic Technologies (cosmetic colors and ingredients and systems). and Sensient Industrial Colors (including paper colors; industrial colors for plastics, leather, wood stains, antifreeze and other uses; inkjet colors and inks; specialty inks, and display imaging).
Asia Pacific and China Groups
The Asia Pacific Group and the China Group focus on marketing the Company�� diverse product line in the Pacific Rim under the Sensient name. Through these operations, the Company offers a range of products from its Flavors & Fragrances Group and Color Group, as well as products developed by regional technical teams to appeal to local preferences. Sales, marketing and technical functions are managed through the Asia Pacific Group's headquarters in Australia. Manufacturing operations are located in Australia, Japan, New Zealand and the Philippines. The Asia Pacific Group maintains offices for research and development, as well as sales, in India, Indonesia, Korea, Singapore and Thailand.
Advisors' Opinion:- [By Seth Jayson]
Calling all cash flows
When you are trying to buy the market's best stocks, it's worth checking up on your companies' free cash flow once a quarter or so, to see whether it bears any relationship to the net income in the headlines. That's what we do with this series. Today, we're checking in on Sensient Technologies (NYSE: SXT ) , whose recent revenue and earnings are plotted below.
Top 10 Chemical Companies To Invest In Right Now: Arkema SA (AKE)
Arkema SA is a France-based company which specializes in the manufacture and marketing of chemical products. The Company operates through its two business segments: Industrial Chemicals and Performance Products. The Industrial Chemicals division offers the production of acrylics, polymethyl methacrylate (PMMA), hydrogen peroxide, fluorochemicals and thiochemicals, and includes such brands as Forane, Albone, Norsocryl, Altuglas and Sarbio. The Performance Products include the production of technical polymers, specialty chemicals and functional additives. The Company's products are used in the construction, automotive and transportation, health, electrical and electronics, agricultural and packaging industries, among others. In April 2013, it acquired a majority stake in AEC Polymers. In October 2013, it inaugurated the new Sumitomo Seika superabsorbent plant on the Carling site, which makes the overall superabsorbent production capacity of the Carling facility up to 47,000 ton/year. Advisors' Opinion:- [By Inyoung Hwang]
Arkema SA (AKE) added 4.7 percent to 83.93 euros. UBS AG raised its rating on the French chemicals maker to a buy from neutral, saying the stock is undervalued. The firm also boosted its price target to 100 euros from 80 euros.
No comments:
Post a Comment